I have found results from700+products and300+suppliers about300d*300d oxford fabric
The term '300d*300d' refers to the denier (thickness) of both the warp and weft yarns. You must verify the fabric density (e.g., 64T, 72T, or 84T), as this determines the tightness of the weave. Additionally, specify the coating type, such as PU (Polyurethane) for flexibility and breathability, or PVC (Polyvinyl Chloride) for superior waterproofing and stiffness. Ensure the weight per square meter (GSM) aligns with your needs, typically ranging from 160g to 220g for this specific denier.
For global trade, prioritize suppliers who provide OEKO-TEX® Standard 100 certification to ensure the fabric is free from harmful substances. If exporting to the EU, verify REACH compliance regarding chemical usage. For outdoor or protective gear, request EN 343 certification for water penetration resistance and ISO 105-B02 for colorfastness to light, ensuring the fabric does not fade quickly under UV exposure.
Depending on the end-use, you should specify functional finishes. For outdoor furniture or covers, request UV-resistant treatment (UPF 50+). For luggage and bags, prioritize Water Repellent (WR) or Super Water Repellent (SWR) finishes. If the fabric is for industrial or tent use, ensure it meets Flame Retardant (FR) standards such as CPAI-84 or NFPA 701. Always ask for a technical data sheet (TDS) to confirm these properties.
Perform a hydrostatic pressure test to check waterproof levels (measured in mm, e.g., 1000mm to 5000mm). Conduct a tear strength and tensile strength test (ISO 13934/13937) to ensure the fabric can withstand mechanical stress. Check for coating adhesion by scratching the surface; the coating should not peel or flake off. Lastly, verify color consistency across different batches using a spectrophotometer or a standard light box.
The primary risk is 'Quality Fade', where mass production quality is lower than the initial sample. To mitigate this, use third-party inspection services (like V-Trust or SGS) to perform During Production (DUPRO) and Final Random Inspections (FRI). Another risk is color shading between different dye lots; always require the supplier to provide lab dips for approval before starting bulk production.
Focus on Total Cost of Ownership (TCO) rather than just the unit price. Negotiate based on volume tiers; for 300d Oxford, price breaks often occur at 5,000 meters and 10,000 meters. Request 'Gold Member' or 'Audited Supplier' status verification on Made-in-China.com to ensure you are dealing with a legitimate factory. Ask for favorable payment terms, such as a 30% deposit and 70% balance against the Bill of Lading (B/L).
Oxford fabric is heavy and bulky. Ensure the supplier uses strong PVC inner tubes and double-layer plastic wrapping to prevent moisture ingress and core crushing during sea freight. Request palletization for easier unloading if you lack specialized equipment. For shipping to the US or Europe, clarify the Incoterms (FOB vs. CIF) and ensure the HS Code (typically 5903.20 for PU coated or 5903.10 for PVC coated) is correctly declared to avoid customs delays.
Always conduct transactions through secure payment channels and consider using Secured Trading Services offered by Made-in-China.com. Avoid transferring large sums to private bank accounts. Ensure the Sales Contract (SC) or Proforma Invoice (PI) explicitly states the technical specifications, lead time, and penalty clauses for quality non-compliance or late delivery.
